How long before I can drive on my new concrete?
Concrete takes 28 days to fully cure. While we recommend that you wait until concrete is fully cured, 7 days is the minimum cure time required before driving on your new concrete. We strongly recommend that you refrain from using Deicing Salt/Chemicals on your concrete for the first year. 

How often does my concrete need to be re-sealed?
The cure & seal product that is applied directly after finishing the concrete, last between 3-6 months. Before winter we strongly recommend applying a permanent sealant. Permanent sealants last 1-2 years and ensure that concrete is protected from the elements; freeze-thaw cycles can cause unwanted cracking.

What is cure & seal? Why Is it needed?
Cure & seal allows the concrete to cure faster and increases the strength of your concrete. It also allows the concrete to maintain the proper amount of moisture, encouraging an even cure. For the best results, cure & seal is crucial!

How do I clean my concrete?
​Start with a garden hose, household soap, and a medium-bristle brush. Following the soap and water scrub, rinse the concrete and let the patio dry. If there are stains, additional cleaning or even stripping the sealer may be needed. We have found that solvents like xylene work well to remove existing sealant. If you do plan on treating a spot, test before you do the whole surface. This will ensure the cleaner works but does not create a bigger problem in the process. At this time, you can then make a determination if the surface really needs to be resealed. 
 
How do I reseal my concrete?
If resealing is necessary, I recommend resealing with the one of the Brickform sealants above. Always test a spot that is not easily visible to make sure the existing sealant and the new sealant are compatible. Brushed concrete should be resealed every 1-2 years. Mike Day's youtube channel, Mike Day Concrete, has an excellent video if you decide to attempt this on your own.

Cleaning
​Start with a garden hose, household soap, and a medium-bristle brush. Following the soap and water scrub, rinse and let the patio dry. If there are stains, additional cleaning or even stripping the sealer may be needed. We have found that solvents like xylene work well. If you do plan on treating a spot, test before you do the whole surface. This will ensure the cleaner works but does not create a bigger problem in the process. At this time, you can then make a determination if the surface really needs to be resealed. 
 
Resealing
If resealing is necessary, I recommend resealing with the stamped concrete, high-shine, sealant above. Always test a spot that is not easily visible to make sure the existing sealant and the new sealant are compatible. Stamped concrete should be resealed every 1-2 years.​